Installation
11
Compress Hybrid 7000i AW – 6721833053 (2020/09)
5.3.3 Fitting the cover
To fit the top cover [1]:
▶ Connect the EMS cable to the control unit [2].
▶ Pull the sides of the cover [1] slightly apart at the back (paying
attention to the top cover) and push the cover backwards.
Fig. 16 Fitting the cover
[1] Cover of the indoor unit
[2] Remote control
To attach the cover [2] to the top fixing [1]:
▶ Push the cover [2] slightly down.
Fig. 17 Attach the cover to the top fixing
[1] Fixing on the top side
[2] Cover of the indoor unit
To attach the cover [2] to the bottom fixing [1]:
▶ Push the cover [2] on the underside slightly back.
Fig. 18 Attach the cover to the bottom fixing
[1] Fixing on the underside
[2] Cover of the indoor unit
To lock the cover [1]:
▶ Screw in the locking screw [2] on the underside of the indoor unit
using a suitable tool.
Fig. 19 Locking the cover
[1] Cover of the indoor unit
[2] Locking screw
0010031293-001
1
2
0010031298-001
2
1
0010031295-001
1
2