Bosch Compress Hybrid 7000i AW - Product Information; Control Unit Functionality

Product description
Compress Hybrid 7000i AW – 6721833053 (2020/09)
4
2 Product description
2.1 Declaration of conformity
The design and operating characteristics of this product comply with the
European and national requirements.
The CE marking declares that the product complies with all the
applicable EU legislation, which is stipulated by attaching this
marking.
The complete text of the Declaration of Conformity is available on the
Internet: worcester-bosch.co.uk.
2.2 Scope of delivery
▶ Upon delivery, check whether the packaging is intact.
▶ Check the scope of delivery for completeness:
–Indoor unit
–Documentation
–Drill template
– Cable glands
– Mounting rail
– Bag with terminals
– Bag with screws
–Outdoor ambient temperature sensor
– Pressure-relief valve and corresponding connections
– Compression fittings
2.3 product overview
Fig. 1 Components and pipe connections of the indoor unit
[1] Automatic air vent valve
[2] Installer module
[3] Relay box
[4] Mixing valve
[5] DHW circulation pump (heat transfer medium)
Fig. 2 Low loss header in the indoor unit (shown without electronic
components)
[1] Low-loss header
[2] Automatic air vent valve
[3] Mixing valve
Fig. 3 Underside of indoor unit
[1] Return to outdoor unit
[2] Flow from the outdoor unit
[3] Return to the auxiliary heater
[4] Flow to heating system
[5] Return from the heating system
[6] Flow to the auxiliary heater
[7] Front of appliance
0010029907-003
1
2
4
5
3
0010029908-004
1
2
3
0010029912-003
1
2
3
4
5 6 7