Appendix
Compress Hybrid 7000i AW – 6721833053 (2020/09)
30
12 Appendix
12.1 Hydraulic diagram
Fig. 40 Hydraulic diagram of the indoor unit
[1] External booster heater
[2] Water pressure relief valve
[3] T0 Flow temperature sensor at the outlet of the buffer cylinder
(installed here instead of on buffer cylinder if buffer cylinder
is not installed)
[4] TC1 flow temperature sensor
[5] Mixing valve
[6] Automatic ventilation
[7] TC0 return temperature sensor
[8] PC0 circulation pump, heating circuit
[9] Particulate filter (filter shut-off valve; accessory)
[10] Outdoor unit
[11] Heating installation
Fig. 41 Hydraulic diagram of a system (1 heating circuit, without bypass; example)
[1] External booster heater
[2] Indoor unit
[3] Outdoor unit
0010029361-002
1
10
8
6
11
7
4
3
9
2
5