Appendix
Control 8310 – 6720856493 (2022/07)
18
17 Appendix
17.1 Control unit specifications
Table 9 Control unit specifications
The technical data of the function modules and the sensor characteristic
curves are contained in the documents of the master control units.
17.2 Commissioning report
The report can also be used as a copy template:
1. Cross off the work that has been carried out.
2. Enter values and date.
3. Sign report.
Table 10 System commissioning report
Unit 8310
Dimensions B/H/L mm 653/274/253
Operating voltage (at 50 Hz ±4 %) V AC 230 (+10 %/–15 %)
Power consumption W 5
Control unit fuse protection A 2x10
Protection index – IP X0D
Protection class – I
Maximum switching current
• Pump outputs A 5 (30 A for 10 ms)
Ambient temperatures
•Operating
• Transport and storage
°C
°C
+5...+50
–20...+60
Max. humidity % 75
Commissioning work Page (individual steps) Carried out Comments (signature)
1. Heating system filled with water and vented? See documents of other
components.
2. Control unit connected?
3. All electrical components connected?
4. System earthed according to local regulations
5. Control set according to system?
6. Function check of components carried out? Description of the
master control unit
7. Function test on all safety equipment carried out and documented?
8. Have the values set been documented? E.g. data backup
9. Operator briefed and technical documents handed over?
Properly-completed commissioning confirmed.
Signature of service engineer
Signature/stamp/heating contractor/date
To Next Page
Loading...
