Bosch CRC200 - Page 13

6 720 821 652 (2017/05)CRC200
Working with the MENU | 13
The following table shows how to activate or modify the time program.
Operation Result
Activate automatic mode with time program
If manual operation is active ( displayed):
▶ Press the auto key.
The user interface controls the room temperature in the automatic mode on the basis of the
time program.
Open time program for several days for one individual weekday
▶ Press the menu key to open the main menu.
The Heating menu is highlighted.
▶ Press the dial to open the selected menu.
▶ Turn the dial to select the Time program menu and press the dial.
The Time program menu is open, the Mon-Fri menu item is displayed.
▶ Turn the dial to select Mon-Fri (change switching times for all weekdays together) or
Saturday ... Friday (change switching times for individual weekdays).
▶ Press the dial.
The selected menu item is open, Heat begin1 is displayed.
Set heat begin or setback begin earlier or later (move switching time)
▶ Open time program for all weekdays or one individual weekday.
▶ Select the switching time and press the dial.
The hour currently set for the switching time and the associated segment in the segment
display start to flash.
▶ Turn the dial to move the switching time.
The setting in the value display changes in 15-minute increments and in the segment
display in 30-minute increments.
▶ Press the dial.
The user interface operates with the modified setting.
Add a new heating phase (e. g. Heat begin2 to Strt setback2)
If all six switching times in the time program are not being used, a new heating phase can be
added.
▶ Open time program for all weekdays or one individual weekday.
▶ Turn the dial to select Heat begin2 and press the dial.
The new switching time is added. The hour and associated segment in the segment display
start to flash.
Table 10 Activating and modifying the time program
6 720 811 158-19.1O
12:41 We
12:41 We
6 720 811 158-20.1O
Mon-Fri
Mon-Fri
6 720 811 158-21.1O
Heat begin1
Heat begin1
6 720 811 158-22.1O
Strt setback1
Strt setback1
6 720 811 158-23.1O
Heat begin2
Heat begin2