6 720 821 652 (2017/05) CRC200
14 | Working with the MENU
▶ Turn the dial to set Heat begin2, e. g. to 02:00pm and press the dial.
The new heating phase is added with a duration of one half-hour. Strt setback2 is set to
02:30pm. If necessary, move Strt setback2 to later, e. g. to 11:00pm. The user interface
operates with the modified settings.
Interrupt heating phase with setback phase (e. g. add setback phase between Heat begin2 and Strt setback2)
▶ Open time program for all weekdays or one individual weekday.
▶ Turn the dial to select Strt setback2 (end of the heating phase being interrupted).
▶ Set Strt setback2 to the start of the interruption, e. g. 06:00pm.
▶ Add a new heating phase and set heat begin and setback begin, e. g. Heat begin3
(09:00pm) to Strt setback3 (11:00pm).
The user interface automatically sorts the heating phases chronologically. The user
interface operates with the modified settings.
Delete a heating phase (e. g. Heat begin2 to Strt setback2)
▶ Open time program for all weekdays or one individual weekday.
▶ Turn the dial to select Strt setback2 and press the dial.
The hour currently set for the switching time and the associated segment in the segment
display start to flash.
▶ Turn the dial to set Strt setback2 to the same hour as Heat begin2.
Delete? appears in the text line
▶ Press the dial.
The heating phase is deleted. The user interface operates with the modified settings.
Delete a setback phase (e. g. Strt setback1 to Heat begin2)
▶ Open time program for all weekdays or one individual weekday.
▶ Delete the heating phase before Strt setback1 (or after Heat begin2).
The user interface automatically sorts the heating phases chronologically.
▶ Set Heat begin1 to earlier (or Strt setback1 to later).
The setback phase is deleted. The user interface operates with the modified settings.
Operation Result
Table 10 Activating and modifying the time program
6 720 811 158-24.1O
Strt setback2
6 720 811 158-25.1O
Strt setback3
6 720 811 158-26.1O
Delete?
6 720 811 158-27.1O
Heat begin1
To Next Page
Loading...
