Bosch DINION IP 7000 HD - Auxiliary Power Connection

Auxiliary power
!
Caution!
Installation should only be performed by qualified service
personnel in accordance with the National Electrical Code
(NEC 800 CEC Section 60) or applicable local codes.
!
Caution!
The Low Voltage power supply unit must comply with EN/UL
60950. The power supply must be a SELV-LPS unit or a SELV -
Class 2 unit (Safety Extra Low Voltage - Limited Power Source).
5 mm
4 5 6 4 5 6
1 2 3 1 2 3
|
|
12VDC
- +
CVBS
24VAC
MENU
µSD
E
T
H
-
P
o
E
D
A
T
A
A
L
A
R
M
Earth
Connect an approved power supply unit with a rated supply
voltage of 24 VAC or 12 VDC as follows:
1. Strip back 5 mm (0.2 in) of insulation on the power supply
cable (must be 16-22 AWG stranded wire or 16-26 AWG
solid wire).
2. Connect the earth terminal of the camera to the system
earth of the installation to ensure correct safety and
EMC/RFI protection.
6.2
20 en | Connection DINION IP 7000 HD
2014.09 | v1.0 | AM18-Q0674 Bosch Security Systems