Bosch DINION IP 7000 HD - Using the Install Wizard

Using the install wizard
1. Power-up the camera and wait briefly before opening the
camera install wizard.
2. Briefly press Menu to start the wizard and display the
following screen on the monitor:
Lens type: DC Iris State: Ready Focus indicator: 8
CONTINUE
< press short >
180° ROTATE
< press long >
Timeout: 300
The lens type is identified and shown on the screen.
The iris is opened to its maximum value.
3. To rotate the image 180°, press and hold Menu until the
image flips.
4. Briefly press Menu to continue.
5. Briefly press Menu to center the focus.
6. Manually adjust the focal length lever on the lens to obtain
the required field of view.
Focus
(∞ <—> N)
Zoom
(T <—> W)
NBN-MCSMB
(optional)
7. Manually adjust the focus lever on the lens to obtain the
sharpest image possible.
7.1.2
28 en | Configuration DINION IP 7000 HD
2014.09 | v1.0 | AM18-Q0674 Bosch Security Systems