8. Briefly press Menu to start the automatic back focus
adjustment (AUTO BACK FOCUS).
– The motorized automatic back focus process runs.
– The progress is shown on the monitor.
9. If the camera is not in focus, press Menu for a longer time
to restart the wizard.
10. If the camera is correctly focused, briefly press the Menu
button to exit the wizard.
– The back focus position is stored.
– The iris is set to its original value.
DINION IP 7000 HD Configuration | en 29
Bosch Security Systems 2014.09 | v1.0 | AM18-Q0674
To Next Page
Loading...
