To avoid injury from unexpected
starting or electrical shock during
unpacking and setting up, do not plug the power
cord into a source of power. This cord must remain
unplugged whenever you are working on the table
saw.
Model GTS1031 Table Saw is shipped complete in
one carton.
Separate all parts from packing materials and check
each one with the illustration and the list of Loose
Parts to make certain all items are accounted for
before discarding any packing material (Fig. 3).
lf any parts are missing, do not
attempt to assemble the table saw,
plug in the power cord or turn the switch on until the
missing parts are obtained and are installed
correctly.
TABLE OF LOOSE PARTS
ITEM DESCRIPTION QTY.
1 Table Saw Assembly 1
2 Rip Fence 1
3 Table Insert 1
4 Barrier Guard Assembly 1
5 Anti-Kickback Device 1
6 Miter Gauge 1
7 Push Stick 1
NOTE: Cut cable tie 8 (for shipping purpose only)
located between the saw base and under carriage
(Fig. 4). You may cause damage to the blade
elevation system if trying to raise blade if cable tie is
not removed.
8
-11-
To Next Page
Loading...
