Bosch HP270-2 - Model Updates and Changes; Introduction of HP 270-3 Model; Introduction of HP 200;250-1 Platform

Page 8 from 56 6-720-821-364 SM HP270 – 250 - 200 2016/12 en
From FD ≥ 660 (Dec 2016):
HPAF2501 (-10ºC / + 35ºC models) (HP270-3)
HPAF2701 (+5ºC / +35ºC models) (HP270-3)
Introduction of HP 270-3 Model
Product Changes:
- New HMI concept;
- Remove of “Rcir” parameter;
- Replacement of Tank Bushes;
- Replacement of charging / measurement point cover;
- Magnesium Anode in tank bottom but possible control by measuring current;
- Electric heater integration in module;
- Change of pump: Electronically controlled with variable speed;
- Change of Fan: Electronically controlled;
Pict. 4 – Detail of impact in hydraulic circuit with electric heater in top of module and new pump
From FD ≥ 660 (Dec 2016):
HPAF2801 (+5ºC / +35ºC models) (HP200/250-1)
Introduction of HP 200/250-1 Platform
Product Changes:
- New Tank Platform (200 / 250 litres)
- New Module design with side connections for air
- Electric heater integrated in module
- Anode in top of tank
Pict. 5 – Detail of new module platform in HP200/250-1