Figure 5.4: Mounting holes used with optional brackets
Notice!
Using a mounting bracket might reduce catch performance.
Always mount the detector within the recommended mounting height, with or without a
mounting bracket.
Brackets are not investigated by UL.
Brackets are not EN50131 compliant.
Notice!
Do not use the bracket to tip the motion detector vertically, unless you intend to compensate
for a non vertical surface. It may cause false alarms or reduced catch performance.
Wire knockouts
Use the following figure to determine the knockouts to use for the desired installation.
5.3
Commercial Series TriTech Motion
Detector
Installation | en 13
Bosch Security Systems, Inc Reference Guide 2015.06 | 02 | F.01U.314.294
To Next Page
Loading...
