Bosch MIC IP ultra 7100i

Other manuals for Bosch MIC IP ultra 7100i

Questions and Answers:

J
Jaclyn BurnsSep 2, 2025
What to do if Bosch MIC IP ultra 7100i Security Camera doesn't work after extreme cold?
- S
  Scott SparksSep 2, 2025
  If your Bosch Security Camera does not operate at all, or does not operate as expected, after being subjected to extreme low temperatures (below -40 ° (-40 °F)), allow the camera to warm up for 60 minutes prior to PTZ operations. If the camera still does not operate after this warm-up period, reset the camera by typing “/reset” at the end of the IP address of the camera in your web browser.
L
Lance MillsAug 31, 2025
Why does my Bosch Security Camera move when trying to control other cameras?
- J
  Jeffrey BrooksAug 31, 2025
  If your Bosch Security Camera moves when attempting to move other cameras, check that the camera’s IP address is properly set. Use Configuration Manager to confirm that two cameras do not have the same IP address, and if they do, change the address of one of the cameras.
S
Susan ParkAug 29, 2025
Why is the picture dark on my Bosch Security Camera?
- T
  Tyler MoralesAug 29, 2025
  If the picture on your Bosch Security Camera is dark, ensure that the Gain Control is set to High, the Auto Iris Level is set to the appropriate level, and the maximum Ethernet cable distance has not been exceeded. If these settings are correct, try restoring all camera settings.
C
cbennettAug 28, 2025
Why is there no video on my Bosch MIC IP ultra 7100i?
- A
  arnoldwilliamAug 28, 2025
  If your Bosch Security Camera is not showing any video, verify that the main power to the power supply is on. For IP-enabled cameras, check if you can access a web page. If you can, try cycling the camera's power off and on. If not, you might have the wrong IP address; use Configuration Manager to identify the correct IP address. Also, ensure there is a 24 V output from the transformer and check the integrity of all wires and mating connectors to the camera.
J
Jordan BlevinsAug 26, 2025
Why does my Bosch MIC IP ultra 7100i Security Camera reboot frequently?
- K
  Karen EdwardsAug 26, 2025
  To resolve frequent or intermittent reboots of your Bosch Security Camera, try testing it with another power supply. Also, check the Bosch website for a software update that might address the issue, as the problem may stem from an improper network connection.
G
Gloria FlowersAug 25, 2025
What to do if “High Shock Event” appears on my Bosch MIC IP ultra 7100i?
- O
  olsonkyleAug 25, 2025
  If the Bosch Security Camera experienced a high shock event, inspect the mechanical parts and screws, especially on the yoke arms. If there's severe damage, discontinue use and contact the Bosch Service Center. If no damage is visible, either cycle the power on the camera or send the command AUX OFF 65 to remove the OSD message.
S
Sarah TuckerAug 22, 2025
Why does my Bosch IP Camera reboot frequently?
- J
  Joshua McclainAug 22, 2025
  Frequent or intermittent reboots of your Bosch IP Camera can occur due to an improper network connection. To resolve this, test the camera with another power supply. Also, check the Bosch website for a software update that might address the issue.

Bosch MIC IP ultra 7100i Specifications

General

Camera Type	PTZ
Weather Resistance	Yes
Power Consumption	60 W max
Video Compression	H.265, H.264, MJPEG
Pan Range	360° continuous
Lens Type	Varifocal
IP Rating	IP68
Resolution	4K Ultra HD (3840 x 2160)
Power	High PoE (60 W)
Frame Rate	30 fps
Day/Night	True Day/Night
Operating Temperature	-40°C to +65°C