Bosch MKK-040 - 4�4 Identification of the Product; Transport and Storage; 5�1 Transporting the Product

Bosch Rexroth AG
D-97419 Schweinfurt
Made in Germany
7210
CNR: R12345678
TYP: MKK-110-NN-3
CS: 9876543210 0030 0001
FD: 5129
s
max
(mm) u (mm/U) v
max
(m/s) a
max
(m/s
2
) M1
max
(Nm) d i
-- -- -- -- -- -- --
MNR: R055722902
Rexroth
10/62 Bosch Rexroth AG Linear modules MKK/MKR-xxx-NN-3 | R320103169/2020-08
4.4 Identification of the product
The name plate of the product contains the following information:
Table 5: Information on name plate
Name plate information Meaning
MNR Material number
FD Date of manufacture
CS Customer order number
Manufacturing location
X When ordering wear parts, please always state all data given on the name plate.
Fig�4: Name plate (example)
5 Transport and storage
5.1 Transporting the product
WARNING
Risk of product falling due to inadequate load handling equipment!
Death or severe injury.
f Use only inspected and suitable load handling equipment.
f Attach load handling equipment only to the frame or at the designated points.
f Do not stand under suspended loads.
NOTES
Risk of damage to motor connection through vibration!
Motor breaks off.
f When transporting the product with assembled motor, always provide support for the motor.
or
f Disassemble the motor prior to transport.
Selection of wrong anchor points
f When lifting and transporting, do not put pressure on end enclosures and screw journals.
f Never suspend from the middle or the ends only!
The name plate contains additional technical data for start-up.
With these parameters and the EasyWizard software, starting up the drives of linear motion systems becomes
easier, faster and more effective than ever before ! 10 Start-up.