Bosch MKK-040 - Disposal; Technical Data; Operating Conditions; 17�1 Tightening Torques

ENGLISH
R320103169/2020-08 | Linear modules MKK/MKR-xxx-NN-3 Bosch Rexroth AG 51/62
15 Disposal
The product contains anumber of different materials: aluminum, steel, plastics, grease and possibly electronic
components.
NOTES
Environmentally hazardous materials can pollute the environment if not disposed of properly.
Environmental pollution.
f Collect any leaking lubricant and recycle it correctly.
f The product and its components must be recycled correctly and in compliance with all applicable national and
international guidelines and regulations.
16 Technical data
Technical data ! "Linear modules" catalog.
17 Operating conditions
Table 18: Operating conditions
17.1 Tightening torques
If not specified otherwise here, please refer to the corresponding publications for tightening torques for
mounting screws.
We use screws in the 8.8 strength class as standard. Any deviations are marked accordingly.
Table 19: Tightening torques
8.8 M2 M2.5 M3 M4 M5 M6 M8 M10 M12 M14 M16
u M
A
(Nm)
m = 0.125
0.4 0.7 1.3 2.7 5.5 9.5 23 46 80 127 194
Operating conditions Value
Ambient temperature with BoschRexroth servo motor 0°C ... 40°C, loss of performance above 40°C
Ambient temperature for mechanical system
(without dropping below dew point)
–10°C ... 50°C
Stroke s
min
1)
See "Technical data" tables in the catalog
Soiling Not permissible
1)
Minimum travel to ensure areliable lubrication distribution.