Bosch MKK-040 - Page 13

ENGLISH
R320103169/2020-08 | Linear modules MKK/MKR-xxx-NN-3 Bosch Rexroth AG 13/62
A ±0,1
B
1 2 3
Fig�8: Fastening the linear modules with sliding blocks
6.4.1 Fastening the product with clamping fixtures
X Mount the frame with clamping fixtures (1/2/3) on the mounting base as shown in the figure below.
X Recommended number of clamping fixtures per meter and side: 1: 6 pieces / 2: 4 pieces / 3: 3 pieces
X Observe specified tightening torque ! 17.1.
Fig�7: Fastening the linear modules with clamping fixtures
K
H
A
± 0,1
B
C
T
± 0,1
L
MKK/MKR/MLR C
(mm)
-110 85
-140 105
-145 78
-165 120
MKR D
(mm)
-145 183 M10
MKK/MKR/
MLR
A
(mm)
B
(mm)
-040 52.2 65.5 M5
-065 81 95 M6
-080 96 110 M6
-110 132 150 M8
-140 167 193 M10
-145 172 198 M10
-165 192 218 M10
ISO 4762-M10
D
6.4.2 Fastening the product with sliding blocks
f Linear modules can be fastened with sliding blocks.
f Recommended number per meter and side: 6 pieces
f Suitable sliding blocks can be obtained from BoschRexroth ! Catalog.
6.4.3 Product mounted on the carriage
f The linear module MKR-145 can be mounted at the carriage for vertical operation.