Bosch MKK-040 - Page 19

ENGLISH
R320103169/2020-08 | Linear modules MKK/MKR-xxx-NN-3 Bosch Rexroth AG 19/62
6.5.6 Switch mounting arrangement MLR-080/-110-NN-3
Magnetic sensor with M8x1 plug
1. Insert the sensor mount (a) into the respective slot (S) in the frame, position it approximately and secure it
with two set screws (b).
2. Insert the sensor (8) into the sensor holder and secure it by turning the clamping screw (9).
Fig�18: Magnetic sensor MLR-080/-110-NN-3
Fig�19: Proximity sensors and mechanical switches MLR-080/-110-NN-3
MLR-110MLR-080
Proximity sensors and mechanical switches
X Assembly ! 6.5.10 / 6.5.11
MLR-080:
S = Slot for magnetic sensor mounts/proximity sensors/mechanical switches
MLR-110:
S = Slot for magnetic sensor mount
a
b
b
8
9
S
2,5
+0,2
0,4
+0,2
S
2,5
+0,2
0,4
+0,2
S
3
3
2
2
5
5