Bosch MKK-040 - Page 44

13.6.2 Relubrication intervals MKK
44/62 Bosch Rexroth AG Linear modules MKK/MKR-xxx-NN-3 | R320103169/2020-08
Relubrication interval:
Relubricate each lube connection with the indicated relubrication quantity after reaching the travel distance(s).
f Relubrication interval of guideway and ball screw assembly (BASA) according to diagram.
f Relubrication is required every two years due to grease aging.
Load ratios (F
m
/C) to be observed separately for guideway (F
mgw
/C
gw
) and BASA (F
mbs
/C
bs
)
100
1.000
10.000
0,00 0,05 0,10 0,15 0,20 0,25 0,30
s (km)
F
m
/C
Nachschmierintervall s der Führung vom MKK für LSS und LPG
20.000
MKK-110/140/165
MKK-040
MKK-065/080
LPG mit Standardbefeung
5.000
0,00 0,05 0,10 0,15 0,20 0,25 0,30
s (km) →
F
m
/C →
20.000
10.000
5.000
500
1.000
MKK-110/140/165
MKK-065/080
MKK-040
10
100
1.000
10.000
0,00 0,05 0,10 0,15 0,20 0,25 0,30
s (km)
F
m
/C
Nachschmierintervall s des BASA vom MKK für LSS und LPG
P = 10
P = 5
P = 16
P = 2
P = 10
P = 5
MKK-040
MKK-065/080/110/140/165
LPG mit Standardbefeung
8.000
6.400
4.000
3.200
2.000
375
188
75
10
0,00 0,05 0,10 0,15 0,20 0,25 0,30
P = 2
P = 10
P = 5
10.000
8.000
6.400
375
1.000
4.000
3.200
2.000
188
75
100
s (km) →
F
m
/C
→
P = 40
P = 16
P = 10
P = 5
P = 32
P = 20
Fig�38: Relubrication intervals guideway; lubrication versions LSS / LPG (greased with Dynalub 510 or 520)
Fig�39: Relubrication intervals BASA; lubrication versions LSS / LPG (greased with Dynalub 510 or 520)
MKK-040
MKK-065
/-080/-110/-140/-165