FlexiDome IP Camera Browser connection | en 45
Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06
the configuration menu is opened. All settings are stored in the
camera memory so that they are retained, even if the power is
interrupted.
Changes that influence the fundamental functioning of the unit
(for example, firmware updates) can only be made using the
configuration menu.
The configuration menu tree allows all parameters of the unit to
be configured. The configuration menu is divided into Basic
Mode and Advanced Mode.
Refer to Section 8 Basic Mode, page 46 for more information on
basic settings; refer to Section 9 Advanced Mode, page 51 for
more information on advanced settings.
Note:
It is recommended that only expert users or system
administrators use the Advanced Mode.
To Next Page
Loading...
