Bosch NDC-455 - Advanced Mode; Advanced Mode Menu Tree

FlexiDome IP Camera Advanced Mode | en 51
Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06
9 Advanced Mode
9.1 Advanced Mode menu tree
The advanced mode configuration menu contains all camera
parameters that can be configured.
To view the current settings:
1. Click the Advanced Mode menu to expand it. The
associated menu sub-headings are displayed.
2. Click a menu sub-heading to expand it.
3. Click a sub-menu. The corresponding page is opened.
The settings are changed by entering new values or by selecting
a pre-defined value in a list field.
Saving changes
After making changes in a window, click Set to send the new
settings to the device and save them there.
Clicking Set saves only the settings in the current window.
Changes in any other windows are ignored.
Click SETTINGS in the applications title bar to close the
window without saving the changes made.
Advanced Mode
> General
>Web Interface
>Encoder
>Camera
>Recording
>Alarm
> Interfaces
>Network
> Service