Pack201 | Maintenance | Section 6
EN | 4
© Bosch Packaging Technology, Inc.
All rights reserved 2012
6.2.2 Weekly Cleaning Procedure
These procedures are recommended after
40 hours of operation.
Proceed with daily cleaning tasks first.
Weekly Cleaning Procedure
Assembly Cleaning Tool Cleaning Procedure
Sealing table (finseal
area)
Damp cloth and
industrial soap or
cleaning solution
Wipe down the sealing table.
Backstand Damp cloth and
industrial soap or
cleaning solution
Clean all metal rollers with an industrial soap
solution. Clean all rubber rollers with a mild soap
solution. Rinse and dry thoroughly.
Discharge conveyor Damp cloth Clean the conveyor belt.
To Next Page
Loading...