Bosch Pack201HS - Page 104

Pack201 | Maintenance | Section 6
EN | 7
© Bosch Packaging Technology, Inc.
All rights reserved 2012
Lubrication Specifications
LUBRIKO HI GREASE
(BOSCH PART NO. 273164)
MASTER LUBRICANTS CO.
TYPICAL CHARACTERISTICS
CONSISTENCY
ASIM PENETRATION @ 77° F, WORKED 265-295
ASIM DROPPING POINT, DEGREES F 480 MIN.
THICKENER TYPE ALUMINUM COMPLEX
THICKENER CONTENT, % 8 - 10
CORROSION TEST PASS #1
WATER STABILITY:
PENETRATION AFTER 1,000,000 STROKES:
10% WATER 400 (EXCELLENT)
OXIDATION BOMB TEST:
MAXIMUM DROP IN 100 HOURS #5 PSI
ADDITIVE TYPE ZINC OXIDE
ADDITIVE CONTENT, % APPROX. 5
OIL:
VISCOSITY @ 100° F, SUS 300 - 350
VISCOSITY INDEX 90
POUR POINT, F° 0
COMPATIBILITY:
PENETRATION AFTER 1,000,000 STROKES:
WATER - 10% 400
WATER - 5% 385
TOMATO JUICE - 50% 404
BEER - 50% 349
PINEAPPLE JUICE - 50% 349
SEA WATER - 50% 396
DETERGENT (0.5% SOLUTION) - 50% 355
5% ACETIC ACID - 50% 385