Pack201 | Operator Interface | Section 4
EN | 4
© Bosch Packaging Technology, Inc.
All rights reserved 2012
4.2 HMI Layout and Structure
The HMI displays the wrapper set up and control func-
tions that can be made with the touch screen�
The screens shown on the following pages are
prepresentative only, and may vary according to each
machine conguration.
Note:
The system operates with software cov-
ered by a user licence. You are in breach
of international law if you copy programs
or parts thereof for use other than that for
which they have been supplied.
Damage caused by changes and/or modi-
cations to the software and hardware
without the permission of Bosch is the
customer’s responsibility.
To Next Page
Loading...