Bosch Radion B810 - RADION Receiver SD

RADION receiver SD RADION receiver SD | en 13
Bosch Security Systems B.V. 2020.05 | 13 | F.01U.261.834
3 RADION receiver SD
The receiver connects RADION wireless peripherals to
supported Bosch control panels using the SDI2 bus connection.
A compatible control panel powers the receiver through the
wiring connection. Features include:
– Easy addressing via a rotary switch
– Cover and wall tamper protection
– RFID and configuration data are contained in persistent
memory
– External LED
– Detection and reporting radio frequency interference
– Supports supervision of wireless points (504), keyfobs
(1000), and repeaters (8)
3.1 Check-in interval and power level for
RADION devices
The RADION suite of devices come in three varieties and are
compatible with three RADION receivers. The three varieties are:
-A versions (ex. RFRP -A), Non -A versions (ex. RFRP), or CHI
versions (ex. RFRP-CHI).
Each variety of detector was originally designed for a certain
geographical region, and catered to that specific region's
regulatory requirements. The B810 receiver supports all device
versions. The slight differences are described below:
– -A version. The -A version is called the "American" version
and complies with applicable regulatory requirements, and
is used in North and South America. -A devices are sold in
North and South America. The supervision message is 3 dB
lower than the alarm message, and the supervision interval
is (approx.) every 65 minutes.
– Non -A version. The Non -A version is the European version
and complies with applicable regulatory requirements in
Europe. Non - A devices are sold in Europe, Africa, and