Bosch Radion B810 - Reed switch settings

RADION receiver SD RADION universal transmitter | en 83
Bosch Security Systems B.V. 2020.05 | 13 | F.01U.261.834
16.2 Reed switch settings
Set the detector to enable or disable the reed switch.
Notice!
Please note, insert the jumper onto the pin prior to installing
the battery. Failure to do so may result in unexpected operation
of the device.
Figure16.2: Reed switch
Callout ￚ Description
1 ￚ No jumper disables the internal reed switch
2 ￚ Jumper on enables the internal reed switch