RADION receiver SD RADION contact SM | en 73
Bosch Security Systems B.V. 2020.05 | 13 | F.01U.261.834
Frequency 433.42 MHz
Tab.13.17: Specifications
13.1 Installation considerations
You have a variety of installation options to consider when
installing the device. You must acknowledge the unique
installation approach prior to installation. Some installation
considerations include:
– Suitable surfaces for installation include wood, steel, and
aluminum.
– The location of the magnet and transmitter in relationship
to the door/window frame dimensions. Verify you have
proper clearance with the latch of the window or door you
are installing the device onto. Failure to do so will make it
extremely difficult to access and open the device for
maintenance purposes.
– In some cases, you might need an additional spacer when
installing the transmitter and magnet in the corner of a
recessed door or window frame to close the gap in height
between the magnet and transmitter.
– For additional security, you can use an adhesive with the
screws to secure the transmitters and magnets during
installation.
– When installing the magnet, verify that the notches in the
magnet base, line up with the notches in the transmitter
base, otherwise the magnet and transmitter do not function
effectively.
– When installing the magnet base, install the face of the
magnet base flush to the surface edge of the installation
location. This prevents damage to the magnet plastic base
whenever a window or door is opened.
To Next Page
Loading...
