Bosch Rexroth 10 Series - Connector for Solenoids

Bosch Rexroth AG, RE 92650/2020-03-03
22 A1VO Series 10 | Axial piston variable pump
Connector forsolenoids
Dimensions [mm]
Connector forsolenoids
DEUTSCH DT04-2P
Molded, 2-pin, without bidirectional suppressor diode
The installed mating connector has the following
Type ofprotection:
▶ IP67 (DIN/EN 60529) and
▶ IP69K (DIN 40050-9)
▼ Switching symbol
▼ Mating connector DEUTSCH DT06-2S-EP04
Consisting of DT designation
1 housing DT06-2S-EP04
1 wedge W2S
2 sockets 0462-201-16141
The mating connector isnot included inthe scope
ofdelivery.
This can besupplied byBoschRexroth onrequest
(materialnumber R902601804).
Notice
If necessary, you can change theposition
oftheconnector byturning thesolenoid body.
The procedure is defined in the instruction manual.