Bosch Rexroth 10 Series - Type Code

Bosch Rexroth AG, RE 92650/2020-03-03
2 A1VO Series 10 | Axial piston variable pump
Type code
Axial piston unit
01 Swashplate design, variable, nominal pressure 250bar, maximum pressure 280bar
A1V
Operating mode
02 Pump, open circuit
O
Size (NG)
03 Geometric displacement, see technical data onpage 7
018 028 035
Control device 18 28 35
04 Pressure controller Setting range 100 to250bar
● ● ● DR
with load-sensing
● ● ● DRS0
Setting range 20 to100bar
● ● ● DN
with load-sensing
● ● ● DNS0
with override, electrically proportional, negative control U = 12 V
● ● ● D3
U = 24 V
● ● ● D4
Controller design and mounting 18 28 35
05 Mounted (only possible with control valve D3 and D4)
● ● ● A
Cartridge (only possible with control valve DR, DRS0, DN and DNS0)
● ● ● C
Setting 18 28 35
06 Adjustable
2
Connector for solenoids
1)
(see page22) 18 28 35
07 Without connector (without solenoid, only for hydraulic control)
● ● ● 0
DEUTSCH - molded connector, 2-pin, without suppressor diode
● ● ● P
Additional function
08 Without additional function
0
Series
09 Series 1, index 0
10
Version ofport and fastening threads 18 28 35
10 Threaded ports according toISO 11926-1 with O-ring seal (ANSI),
Metric fastening thread according toDIN13 onthe through drive
● ● ● B
Thr
eaded ports, metric, according toISO 6149-01 with O-ring seal,
Metric fastening thread according toDIN13 onthe through drive
● ● ● M
Dir
ec
tion ofrotation 18 28 35
11 Viewed ondrive shaft clockwise ● ●
● R
counter-clockwise ● ●
● L
Sealing material
12 FKM (fluoroelastomer)
V
Mounting flange 18 28 35
13 ISO 3019-1 (SAE J744) 82-2
● ● – A2
101-2
● ● ● B2
ISO 3019-2 (metric) 80-2
● ● – K2
1) Connectors for other electric components may deviate
Type code
01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18
A1V O 2 0 / 10 V 00 – 0