Bosch Rexroth 10 Series - Safety Instructions

Bosch Rexroth AG, RE 92650/2020-03-03
26 A1VO Series 10 | Axial piston variable pump
Safety instructions
Safety instructions
▶ During and shortly after operation, there isarisk
ofburning onthe axial piston unit and especially onthe
solenoids. Take theappropriate safety measures
(e.g.bywearing protective clothing).
▶ Moving parts incontrol equipment (e.g.valve spools)
can, under certain circumstances, get stuck inposition
asaresult ofcontamination (e.g.contaminated
hydraulic fluid, abrasion, orresidual dirt from
components). As aresult, thehydraulic fluid flow and
thebuild-up oftorque inthe axial piston unit can
nolonger respond correctly tothe operator’s
specifications. Even theuse ofvarious filter elements
(external orinternal flow filtration) will notrule out
afault but merely reduce therisk. The machine/system
manufacturer must test whether remedial measures are
needed onthe machine for the application concerned
inorder tobring the driven consumer into asafe
position (e.g. safe stop) and ensure any measures are
appropriately implemented.