Bosch Rexroth 10 Series - Transport and Storage; Transporting the Axial Piston Unit

BoschRexrothAG, RE 91485-01-B/2021-11-18
26/72 A10FZO, A10VZO, A10FZG and A10VZG series 10 | Transport and storage
6 Transport and storage
▶ Always observe the required ambient conditions for transport and storage;
see chapter 6.2 "Storing the axial piston unit" on page 28.
Information on unpacking can be found in chapter7.1 "Unpacking" on
page31.
6�1 Transporting the axial piston unit
The following transportation options are available depending on weight and
duration of transport:
• Transport by hand
• Transporting with alifting device (eye bolt or lifting strap)
Tabelle 10: Dimensions and weights A10FZO
Size 10 18 28 45 63
Weight kg 9 10 15.5 21 26
Width mm Dimensions vary by equipment. The values applicable for
your axial piston unit can be found in the installation drawing
(request if necessary).
Height mm
Depth mm
Weight may vary by equipment.
Tabelle 11: Dimensions and weights A10VZO
Size 3 to 10 18 28 45 71 100 140 180
Weight with port
plate
14N00, 12N00 kg 8 12 15 27 36.5 55 70 –
22U00 kg – – – – 47 69 73 78
07K.., 12K.. kg 10.5 14 18 28 – – – –
22U.. kg – – – – 47 69 73 78
Width mm Dimensions vary by equipment. The values applicable for
your axial piston unit can be found in the installation drawing
(request if necessary).
Height mm
Depth mm
Weight may vary by equipment.
Tabelle 12: Dimensions and weights A10FZG
Size 10 18 28 63
Weight kg 9 10 15.5 26
Width mm Dimensions vary by equipment. The values applicable for
your axial piston unit can be found in the installation drawing
(request if necessary).
Height mm
Depth mm
Weight may vary by equipment.
Tabelle 13: Dimensions and weights A10VZG
Size 10 18 28 63
Weight kg 11.3 13.5 20 32
Dimensions and weights
Dimensions and weights
Dimensions and weights