Bosch Rexroth 10 Series - Designations; Abbreviations

RE 91485-01-B/2021-11-18, BoschRexrothAG
About this documentation | A10FZO/G, A10VZO/G 7/72
Tabelle 3: Meaning of symbols
Symbol Meaning
If this information is disregarded, the product cannot be used and/or
operated to its full extent.
▶
Single, independent action
1�
2�
3�
Numbered instruction:
The numbers indicate that the actions must be completed in order.
1�3�3 Designations
This documentation uses the following designations:
Tabelle 4: Designations
Designation Meaning
A10FZO Axial piston fixed displacement unit, open circuit
A10VZO Axial piston variable displacement unit, open circuit
A10FZG Axial piston fixed displacement unit, open and closed circuit
A10VZG Axial piston variable displacement unit, open and closed circuit
Threaded plug Metal screw, pressure-resistant
Protective plug Made out of plastic, not pressure-resistant, only for transportation
As ageneric term for "axial piston units for variable-speed drives
A10FZO, A10VZO, A10FZG and A10VZG", the designation "axial piston unit" will be
used hereinafter.
1�3�4 Abbreviations
This documentation uses the following abbreviations:
Tabelle 5: Abbreviations
Abbreviation Meaning
ANSI American National Standards Institute is an organization that coordinates
the development of voluntary standards in the United States
ATEX EC directive on explosion protection (Atmosphère explosible)
DIN Deutsches Institut für Normung (German Institute for Standardization)
DG Two-point control, directlycontrolled
DR Druckregler (pressure controller), hydraulic
EZ Two point control electric
ISO International Organization for Standardization
JIS Japan Industrial Standard
LA Torque controller
RE Rexroth document in the English language
VDI2230 Guideline for the systematic calculation of heavy-duty
threaded connections and cylindrical screw joints from the
VDI(VereinDeutscherIngenieure - Association of German Engineers)