Bosch Rexroth 10 Series - Storing the Axial Piston Unit

BoschRexrothAG, RE 91485-01-B/2021-11-18
28/72 A10FZO, A10VZO, A10FZG and A10VZG series 10 | Transport and storage
Abb� 10: Mounting the eye bolt
WARNING! Danger due to suspended loads!
During transport with lifting strap, the axial piston unit can topple out of the lifting
strap and cause injury.
▶ Use the widest possible lifting strap.
▶ Make sure that the axial piston unit is securely fixed with the lifting strap.
▶ Only guide the axial piston unit by hand for fine positioning and to avoid
swinging.
▶ Never step or grip under suspended loads.
▶ Place the lifting strap around the axial piston unit in such away that it does not
pass over assembled parts (e.g.valves, piping) and that the axial piston unit is
not suspended from assembled parts (see Abb. 11).
Abb� 11: Transport with lifting strap; example A10VZO
6�2 Storing the axial piston unit
• Storage areas should be free of corrosive materials and gases.
• To prevent damage to the seals, do not operate ozone-forming equipment
(e.g.mercury-vapor lamps, high-voltage equipment, electric motors, sources of
electrical sparks or electrical discharge) in storage areas.
Transport with lifting strap
Requirement