Bosch Rexroth A15VSO - 10 Maintenance and repair

Operation 47/60
RE 92801-01-B/11.2018, A15VSO/A15VLO Series 11, BoschRexrothAG
9 Operation
This product isacomponent which requires nosettings orchanges during operation.
For this reason, this chapter ofthemanual does not contain any information
onadjustment options. Use the product only within the performance range specified
inthe technicaldata. The machine/system manufacturer isresponsible forproper
project planning ofthe hydraulic system and its control.
10 Maintenance and repair
NOTICE
Overdue inspection and maintenance work!
Property damage!
▶ Perform the specified inspection and maintenance work attheintervals
described inthis manual.
10.1 Cleaning and care
NOTICE
Damage toseals and electrical system due tomechanical effects!
The jet ofahigh-pressure cleaner may damage the seals and electrical system
oftheaxial piston unit!
▶ Do not point ahigh-pressure cleaner atsensitive components, e.g.shaft seal,
electrical connections and components.
For cleaning and care oftheaxial piston unit, observe the following:
▶ Check whether all seals and plug-in connections are securely seated toensure
nomoisture can penetrate into the axial piston unit during cleaning.
▶ Use only water and, ifnecessary, amild cleaning agent toclean the axial piston
unit. Never use solvents oraggressive cleaning agents.
▶ Remove major external contamination and keep clean sensitive and important
components, such assolenoids, valves, indicators and sensors.