Disposal 51/60
RE 92801-01-B/11.2018, A15VSO/A15VLO Series 11, BoschRexrothAG
12 Disposal
Careless disposal oftheaxial piston unit, the hydraulic fluid and the packaging
material can result inenvironmental pollution.
Observe the following when disposing oftheaxial piston unit:
1. Completely drain the axial piston unit.
2. Dispose oftheaxial piston unit and packaging material inaccordance with the
regulations inyour country.
3. Dispose ofthehydraulic fluid inaccordance with the regulations ofyour country.
Also observe the applicable safety data sheet for the hydraulic fluid.
4. Disassemble the axial piston unit into its constituent parts for proper recycling.
5. For example, separatethe parts into:
– Castings
– Steel
– Aluminum
– Non-ferrous metal
– Electronic waste
– Plastic
– Seals
13 Extension and conversion
Do not modify the axial piston unit orits assembled parts. This includes also the
change ofthesetting screws orthewiring.
Changes tosettings onthe customer side should only bemade using the
product-specific setting instructions.
The warranty from BoschRexroth only applies tothe product asdelivered.
Thewarranty will bevoided iftheunit ismodified orextended.
Setting screws are protected against unauthorized adjustment bytamper-proof
caps. Removal ofthetamper-proof caps will void the warranty. If you need
tochange the settings, please contact your local contact person; you can find
their contact information at
www.boschrexroth.com/addresses