Bosch Rexroth BS 2/R-300 - Assembling the product; Installing the belt section on leg sets

7.6 Assembling the product
7.6.1 Installing the belt section on leg sets
Fig. 3:
SW13
M = 25 Nm
D
BS 2/...
563 833-02
SZ 2
SZ 2
Installing the belt section on leg sets (1/2)
1. Install the belt section
on 2 to 4 leg sets.
Please note:
• Install one leg set each in
the immediate vicinity of
the drive and return unit.
• Install the leg sets
under each of the
cross connectors of the
belt section.
• Max. distance between
2 leg sets: 2000 mm.
Assembly 19/84
3 842 563 834/2022-08, MIT: BS 2/C-…, BS 2/R-…, Bosch Rexroth AG
ENGLISH