Bosch Rexroth BS 2/R-300 - Changing the Conveyor Chain: BS 2;C-H, BS 2;R-H, BS 2;R-V+ 1200, Motor Mounting (MA) = R;L

10.4.19 Changing the conveyor chain: BS 2/C-H, BS 2/R-H, BS 2/R-V+ 1200,
motor mounting (MA) = R/L
Fig. 50:
563 833-52
4
4
4
M
4x
D
= 7 Nm
SW4
SW10
M
D
= 8 Nm
9
3
X
"X"
M
4x
D
= 7 Nm
SW4
2
1
7
6
5
BS 2/R-H BS 2/R-VBS 2/C-H
2
6
8 981 010 510
3 842 539 357
8 981 010 511
3
)
3
)
3
)
M
D
= 2,5 Nm
SW4
Changing the conveyor chain BS 2/C-H, BS 2/R-H, BS 2/R-V+ 1200, MA = R/L (1/3)
Please note:
Perform the steps on both
sides in parallel.
Disassembling the chain:
1. Remove the gear motor.
2. Remove the side cover
plates, remove the
bottom cover sheets.
3. Fix the chain tensioner.
4. Open the chain with the
disassembly tool
3
).
3
) Disassembly tool:
– for fl at top chain:
3 842 010 510
– for accumulation roller chain:
3 842 010 511
– for accumulation roller chain
Vplus: 3 842 539 357
5. Remove the cover of the
return head.
6. Pull the used chain down
from the BS 2....
7. Remove the sliding piece
from the return head.
8. Remove the return
wheels from the
return head.
Maintenance and repair 67/84
3 842 563 834/2022-08, MIT: BS 2/C-…, BS 2/R-…, Bosch Rexroth AG
ENGLISH