Bosch Rexroth BS 2/R-300 - Automatic lubrication unit

10.3.6 LU 2 automatic lubrication unit
The LU 2 automatic lubrication unit allows for lubrication of the chain while in operation.
Lubrication of the chain is only possible at the drive module.
The automatic lubrication unit LU 2 consists of the components
• LU 2 lubrication unit, 3 842 543 482
• LC 2 oil container, 3 842 543 469
• Adapter set AS 2/C-100, -250, 3 842 543 483
1
)
• Adapter set AS 2/C-400, 3 842 543 484
• Adapter set AS 2/R-300, -700, 3 842 543 485
1
)
• Adapter set AS 2/R-1200, -2200, 3 842 543 486
• Adapter set AS 2/R-V-1200, 3 842 543 487
1
) For retrofi tting older transfer systems without a lubrication hole, you also need
a retrofi t kit LU 2, 3 842 546 725.
LU 2 BS 2/C-100, BS 2/C-250 BS 2/C-H
LU 2
LC 2
Set AS ...
*)
*)
3 842 543 482, LU 2
+ 3 842 543 469, LC 2 + 3 842 543 483, set AS 2/C-100, -250 + 3 842 543 484, set AS 2/C-400, -700
BS 2/R-300, BS 2/R-700 BS 2/R-1200 BS 2/R-V+ 1200
*)
*) *)
+ 3 842 543 485, set AS 2/R-300, -700 + 3 842 543 486, set AS 2/R-1200, -2200 + 3 842 543 487, set AS 2/R-V
Fig. 25:
LU 2 automatic lubrication unit, overview
The holes marked * are used to connect the LU 2 automatic lubrication unit.
Maintenance and repair 45/84
3 842 563 834/2022-08, MIT: BS 2/C-…, BS 2/R-…, Bosch Rexroth AG
ENGLISH