3/84 Contents
1 About this documentation 6
1.1 Validity of the documentation 6
1.2 Required and supplementary documentation 6
1.3 Presentation of information 6
1.3.1 Safety instructions 6
1.3.2 Symbols 7
1.3.3 Designations 8
1.3.4 Abbreviations 8
2 Safety instructions 8
2.1 About this chapter 8
2.2 Intended use 8
2.3 Improper use 9
2.4 Personnel qualifi cations 9
2.5 General safety instructions 9
2.6 Product-specifi c safety instructions 10
2.7 Personal protective equipment 11
2.8 Owner responsibilities 11
3 General notes on property and product damage 11
4 Scope of delivery 13
4.1 Condition on delivery 13
5 About this product 13
5.1 Specifi cations 13
5.1.1 Using belt section BS 2/... 13
5.1.2 Design of belt section BS 2/... 13
5.2 Product description 14
5.3 Identifi cation of the product 15
6 Transport and storage 15
6.1 Transporting the product 15
6.2 Storing the product 15
7 Assembly 16
7.1 Unpacking 16
7.2 Installation requirements 16
7.2.1 Installation position 16
7.3 Required tools 16
7.4 Required accessories 17
7.5 Symbols used 18
7.6 Assembling the product 19
7.6.1 Installing the belt section on leg sets 19
7.6.2 Modifying the mounting position of the motor-gear combination
or the gear motor 21
7.6.3 BS 2/C-100, …-250, BS 2/R-300, …-700:
Disassembling the protective case 22
7.6.4 BS 2/C-100, …-250, BS 2/R-300, …-700, BS 4/R-300, …-700:
Installing the belt section between two sections 23
7.6.5 BS 2/C-H, BS 2/R-H, BS 2/R-V+ 1200:
Installing the belt section between two sections 24
7.6.6 BS 2/R-H, BS 2/R-V+ 1200, reversible:
Installing the belt section between two sections 25
7.6.7 BS 2/C-100, …-250, BS 2/R-300, …-700, BS 4/R-300, …-700:
Assembling two belt sections drive head-to-return unit 26
7.6.8 BS 2/C-H, BS 2/R-H, BS 2/R-V+ 1200:
Assembling two belt sections drive head-to-return unit 27
Contents
3/84
3 842 563 834/2022-08, MIT: BS 2/C-…, BS 2/R-…, Bosch Rexroth AG
ENGLISH
To Next Page
Loading...
