Bosch Rexroth BS 2/R-300 - Replacing the Gear Motor: BS 2;C-H, BS 2;R-H, BS 2;R-V+ 1200; Motor Mounting (MA) = R;L

Maintenance and repair 75/84
3 842 563 834/2022-08, MIT: BS 2/C-…, BS 2/R-…, Bosch Rexroth AG
10.4.24 Replacing the gear motor: BS 2/C-H, BS 2/R-H, BS 2/R-V+ 1200,
Motor mounting (MA) = R/L
Fig. 58:
563 833-65
SW10
M
D
= 8 Nm
3
4
2
5
1
6
Replacing the gear motor, motor mounting (MA) = R/L
Please note:
The gear motor can only
be exchanged completely.
A separation of motor and
gear is not permitted!
1. Remove the gear motor.
2. Remove the fl ange from
the gear motor.
3. Remove the plug.
4. Mount the plug at the
new gear motor.
5. Mount the fl ange at the
new gear motor.
6. Install the gear motor.
ENGLISH