7.6.7 BS 2/C-100, …-250, BS 2/R-300, …-700, BS 4/R-300, …-700:
Assembling two belt sections drive head-to-return unit
Fig. 10:
563 833-72
3 842 529 881
52
M
D
= 15 Nm
SW5
=
=
5
2
2
4
4
1
3
3
5
1
BS 2/C-100, … : Assembling two belt sections drive head-to-return unit
Required accessories:
• Connection kit
3 842 529 881 (1x)
1. Disassemble the outer
protective case halves.
2. Slide the connection kit
into the T-groove at the
drive head.
3. Align the return unit of
the adjacent belt section
and position it without
a gap at the height of
the drive head.
4. Install the connection kit
centrally between drive
head and return unit.
5. Mount the outer halves
of the protective case.
26/84 Assembly
Bosch Rexroth AG, MIT: BS 2/C-…, BS 2/R-…, 3 842 563 834/2022-08
To Next Page
Loading...
