Bosch Rexroth BS 2/R-300 - Replacing wear parts

10.4 Replacing wear parts
10.4.1 Designations
This document uses the following designations:
Table 8: Designations
Designation Meaning
Chain Conveyor chain with conveyor medium:
• Flat top chain (.../C-...)
• Accumulation roller chain (.../R-...)
• Accumulation roller chain Vplus (…/R-V-…)
KT Chain type accumulation roller chain with ...
• PA accumulation rollers (KT = 1)
• Steel accumulation rollers (KT = 2)
• PA accumulation rollers and small parts protection (KT = 3)
• Steel accumulation rollers and small parts protection (KT = 4)
10.4.2 Required tools
• Hex wrench (open-end):
SW8, SW10, SW13, SW19, SW27.
• Hex socket wrench:
SW4.
• Two slotted screwdrivers
• Spirit level
• Combination pliers
10.4.3 Required accessories
• For fl at top chain:
– Disassembly tool: 3 842 010 510
– Chain lock: 3 842 535 333
• For accumulation roller chain:
– Disassembly tool: 3 842 010 511
– Chain lock: 3 842 530 417
• For accumulation roller chain Vplus:
– Disassembly tool: 3 842 539 357
– Chain lock: 3 842 538 872
8 981 010 510
3 842 535 333
8 981 010 511
3 842 530 417
3 842 539 357
3 842 538 872
Flat top chain Accumulation roller chain Accumulation roller chain Vplus
Fig. 26: Required accessories
46/84 Maintenance and repair
Bosch Rexroth AG, MIT: BS 2/C-…, BS 2/R-…, 3 842 563 834/2022-08