Bosch Rexroth BS 2/R-300 - Bs 2;C-H, Bs 2;R-H, Bs 2;R-V+ 1200; Assembling Two Belt Sections Drive Head-To-Return Unit

7.6.8 BS 2/C-H, BS 2/R-H, BS 2/R-V+ 1200:
Assembling two belt sections drive head-to-return unit
Fig. 11:
563 833-73
3 842 530 871
SW10
M
D
= 8 Nm
M
4x
D
= 7 Nm
SW4
M
4x
D
= 7 Nm
SW4
2
3 5
3
4
5
6
1 7
6
2
SW13
M
D
= 25 Nm
4
BS 2/C-H, … : Assembling two belt sections drive head-to-return unit
Required accessories:
• Connection kit
3 842 530 871 (1x)
1. Remove the gear motor.
2. Remove the side
cover plates.
3. Install the connection
kit at the drive head.
4. Align the return unit of
the adjacent belt section
and position it without
a gap at the height of
the drive head.
Mount the connection
kit to the return unit.
5. Mount the side
cover plates.
6. Mount the gear motor.
Assembly 27/84
3 842 563 834/2022-08, MIT: BS 2/C-…, BS 2/R-…, Bosch Rexroth AG
ENGLISH