14/70 Safety instructions
Bosch Rexroth AG, General Operating Instructions HYDROTRAC GFT 8000 series 40, RE 79022-01-B/04.2020
Setting down the planetary gearbox on unsuitable, non-load-bearing base!
Risk of injury or property damage by tipping over the planetary gearbox!
Always load the planetary gearbox on a load-bearing surface.
Secure the planetary gearbox against tipping over by the use of chocks,
wooden bars or the load boards provided by Rexroth.
Leaking hydraulic fluid due to leakages of the machine or vehicle!
Risk of burns and injuries due to leaking oil jet!
Relieve any system pressure in the machine or vehicle and repair the leak.
Never try to stop or seal the leak or oil jet using a cloth.
2.7 Personal Safety Equipment (PSA)
The personal safety equipment for users of the planetary gearbox comprises:
• Safety gloves
The required characteristics of the safety gloves are determined by the conditions
encountered in practice.
Wear resistant safety gloves of the corresponding classification (according to
action step, for example, heat-resistant, oil-resistant, cut-resistant).
• Protective goggles (sealed)
• Safety shoes
• Heat-resistant safety wear, if necessary, flameproof protective clothing
• If necessary, safety helmet
When in contact with lubricating oil, preserving agents, solvents, detergents
and hydraulic fluid, please wear the mandatory safety equipment as outlined in
the respective product data sheets and safety data sheets.
All components of the personal safety equipment must be intact.
To Next Page
Loading...
