Transport and storage 25/70
RE 79022-01-B/04.2020, General Operating Instructions HYDROTRAC GFT 8000 series 40, Bosch Rexroth AG
Observe the manufacturer's product data sheets and safety data sheets when
using preservative. These data sheets are not included within Rexroth's scope
of supply.
Apply a layer of grease onto the output seal area, before you apply the external
preservation. Use a lithium multi-purpose grease L-XBCHA3 (GB 7324-94) or
FAG Arcanol MULTI3 or Klüberplex BE 31-222. Thus preventing, that
preservative reaches to the output seal. For the output seal, refer to the spare
parts drawing, view ”B“ in appendix
D “Technical data / Drawings” of the material number-specific operating
instructions.
Use a brush to apply the preservative evenly onto the bright spots.
6.2.2 Maximum storage periods
The following storage conditions must be met to ensure a maximum storage period
of 12 months:
• Temperature -30 … 60°C, relative air humidity of max. 70%
• Dry and dust-free
• Protected against rain, snow and sunlight
To Next Page
Loading...
