8-2 Bosch Rexroth AG | Electric Drives and Controls Rexroth IndraControl VCP 25 | R911299720 / 02
Maintenance and Installation
8.5 Identification
You can identify the small operator terminal by the nameplate on the
rear.
Fig. 8-1: Nameplate (example)
1 Ordering name / Short type designation
2 Part number
3 Voltage and power specification
4 Serial number
Depending on the size of the display, you will be able to read various
types of information as the operating device is initialized: clock fre-
quency, application memory size, current firmware version, program-
ming software version, project name, time, date, number of compilation
runs and a random number.
To Next Page
Loading...
