1-2 Bosch Rexroth AG | Electric Drives and Controls Rexroth IndraControl VCP 25 | R911299720 / 02
System Presentation
1.2 Operating system
A special operating system is installed on the small operator terminal. If
necessary, this operating system can be reloaded into the device (firm-
ware download). This can be done with the associated programming
software "VI Composer".
1.3 Commissioning
Mount the device properly (for more information, see chapter Dimen-
sions). Then connect the device to the voltage supply and to the control
unit or the field bus system, if required.
To Next Page
Loading...
