192/263 Bosch Rexroth AG | Tightening Technology 3 608 870 A47
Nexo cordless Wi-Fi nutrunner | 3 608 870 A47/2017-
Timeout options
Scan options
The field is only displayed, if Scanner is selected as ID input source.
Barcodes
The field is only displayed, if Scanner is selected as ID input source. Activate the respective barcode
types.
9.6.3.3 Single program
This job step comprises the basic functions for a single job sequence.
General
This panel defines the general properties of the job.
Table 9–26: ID input step dialog - timeout options panel
Element Description
Timeout Enter the maximum time when an event, e.g. a successful barcode scan, has
to take place. If no event occurs in this time, the step is terminated.
Error message Enter an error message that will be displayed on the tool display after the tim-
eout.
Table 9–27: ID input step dialog - scan options panel
Element Description
Trigger scan process The laser beam of the barcode scanner can be activated using the start
switch or the function keys. This starts the scanning of the barcode. If the
PLC signal EnScan is present, the approval for this has to be present before-
hand.
– Start switch
– Center function key
–Function key Left
–Function key Right
– PLC signals
Laser on time Maximum time that the laser is turned on.
Acoustic signal If the checkbox is selected, an acoustic signal will resound after recognition
of a bar code.
Click the icon to insert a new single program step in the job program before the selected
step. Double clicking the step or the respective icon opens the corresponding dialog for en-
tering the parameters.
Table 9–28: Single program dialog - general panel
Element Description
Name Step name
Admissible characters are ASCII characters, numbers, spaces, hyphens,
dashes and underscore.
Comments Description of the job step
Admissible characters are ASCII characters, numbers, spaces, hyphens,
dashes and underscore.
To Next Page
Loading...
