Bosch Rexroth Nexo - Page 193

3 608 870 A47 Tightening Technology | Bosch Rexroth AG 193/263
Nexo cordless Wi-Fi nutrunner | 3 608 870 A47/2017-05
ID code
Example: Combine multiple ID inputs
The results of one ID input step in the mode and three ID input steps in the job are combined in one ID
code in the single program step.
Fig. 9–3: Example: Combine multiple ID inputs
Table 9–29: Single program dialog - ID code panel
Element Description
Combine multiple ID inputs If the check box is enabled, the results of various
ID input steps can be combined in an ID code. To create the new ID code,
you can define a prefix and a postfix as well as a max. of 10 more compo-
nents.
You can select the following values:
–$Mode
Result of the mode.
–Userdefined Text
User defined text.
–IDInput<xx>
Result of a scan step of the respective job.
Example: $ID Input1@A2 is the result in the step, column A, line 2.
The ID code will be displayed on the tool display.
Mode Æ ID input step Target selection: ID code
Job Æ Æ
Identier: $ID input1@ A2
Job Æ
$ID input2@ A3
Job Æ
$ID input3@ A4
Job Æ Single program step Æ
Combination of various ID inputs:
Part 1 = $mode
Part 2 = $I D i nput1@ A2
Part 3 = $I D i nput2@ A3
Part 4 = $I D i nput3@ A4
NEXO
OS
V
1100
NEXOOSV1100
ID input step Target selection: ID code
ÆID input step Target selection: ID code
Identier:
ÆID input step Target selection: ID code
Identier:
Æ