3 608 870 A47 Tightening Technology | Bosch Rexroth AG 211/263
Nexo cordless Wi-Fi nutrunner | 3 608 870 A47/2017-05
File Share
Settings Data Standard Nexo File Share
Use this menu item to define the configuration of the File Share connection for results output.
Table 9–60: File Share index card
Element Description
Active Enable the check box to activate data output via File Share.
If results output is disabled, no more results files will be generated. Results
files which have already been generated and still exist will not be output be-
fore
File Share output has been reactivated.
IP address / DNS Either directly enter the IP address of the File Share server or the DNS entry
of the File Share server.
Group ID Enter the group ID for File Share connection.
The group ID has to be valid on the File Share server and has to have write
access to the target directory and authorization to create directories. If nec-
essary, ask your system administrator whether the user has write access.
User ID Enter the user ID for File Share connection.
The user ID has to be valid on the File Share server and has to have write ac-
cess to the target directory and authorization to create directories. If neces-
sary, ask your system administrator whether the user has write access.
Directory Enter the directory
1
for the tightening results on the File Share server.
1. This refers to the root directory for the registered user. This directory can be located several levels
below the actual root directory of the drive. If no directory has been entered, the root directory for the
indicated user will automatically be used as the storage location.
Type Select the classification of data:
– NFS
For Unix and Linux operating systems.
–CIFS
CIFS (Common Internet File System) for Windows operating systems.
Save Click Save to save the edited data.
Discard Click Discard to discard the edited data.
Data See Data button (page 212)
Storage See File button (page 216)
Restore defaults All settings in this dialog are reset to the factory setting.