Bosch Rexroth Nexo - Page 213

3 608 870 A47 Tightening Technology | Bosch Rexroth AG 213/263
Nexo cordless Wi-Fi nutrunner | 3 608 870 A47/2017-05
Parameter of results output
The output file includes the following parameters:
Fig. 9–4: “Standard Nexo” output format
General tightening result parameters
A General tightening result parameters (see page 213)
B Step data: In the results file, all tightening steps of the program are put out individually.
B1 Step result parameters (see page 214)
B2 Tightening function parameters (see page 215): All target and monitoring functions relating to the step, includ-
ing designation, target value and actual value are put out.
B3 Graph parameters (graph) (see page 215): In addition, the associated graph points are returned under each
step:
Table 9–62: General tightening result parameters and their meaning
Parameter
Meaning
date Date/time of tightening
channel Channel name
no. Channel number
cell id Cell ID
tool serial Nutrunner serial number
nominal torque Nominal spindle torque of the nutrunner
torque unit Unit of the torque
MCE factor MCE factor of the nutrunner
cycle Nutrunner cycle counter
id code ID code
job Nr 0-255 = number of the job
-1 = job inactive or not available
prg nr Number of the tightening program
prg name Name of the tightening program
prg date Date of the last change in the tightening program
result Total tightening result OK/NOK
quality code Quality code
total time Total tightening time